#!version:1.0.0.1
network.pppoe.user = 
network.pppoe.password =  
network.vlan.internet_port_enable = 0
network.vlan.internet_port_vid = 
network.vlan.internet_port_priority = 
network.vlan.dhcp_enable = 
network.vlan.dhcp_option =      
network.port.http = 
network.port.https = 
network.port.max_rtpport = 20000
network.port.min_rtpport = 10000
network.qos.rtptos = 
network.qos.signaltos = 
network.802_1x.mode = 
network.802_1x.identity = 
network.802_1x.md5_password = 
network.vpn_enable = 
network.lldp.enable =  
network.lldp.packet_interval = 
syslog.mode = 
syslog.server = 
syslog.log_level = 
auto_provision.pnp_enable = 0
auto_provision.mode = 1
auto_provision.repeat.enable = 1
auto_provision.repeat.minutes = 1440
auto_provision.weekly.enable = 1
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 23:00
auto_provision.weekly.end_time = 23:59
auto_provision.server.url = https://SERVER.niacs.nl/provisioning/yealink/
auto_provision.server.username =
auto_provision.server.password = 
auto_provision.pnp_domain_name =
auto_provision.pnp_event_vendor =
auto_provision.common_file_name =
auto_provision.dhcp_enable = 
auto_provision.dhcp_option.option60_value = 
auto_provision.dhcp_option.list_user_options = 
auto_provision.aes_key_16.com =
auto_provision.aes_key_16.mac =
sip.use_out_bound_in_dialog = 
sip.reg_surge_prevention = 
transfer.semi_attend_tran_enable = 0
transfer.blind_tran_on_hook_enable = 1
transfer.on_hook_trans_enable = 1
wui.https_enable = 
wui.http_enable = 
bw.feature_key_sync = 
security.trust_certificates = 0
security.user_password = admin:newimage
base.pin_code =
security.ca_cert = 2
security.dev_cert = 0
security.cn_validation = 0
lang.wui = 
local_time.time_zone = +1
local_time.time_zone_name = Netherlands(Amsterdam)
local_time.ntp_server1 = nl.pool.ntp.org
local_time.ntp_server2 = europe.pool.ntp.org
local_time.interval = 3600
local_time.summer_time = 2
local_time.dst_time_type = 
local_time.start_time = 
local_time.end_time = 
local_time.offset_time = 
local_time.dhcp_time = 
dialplan.area_code.code = 
dialplan.area_code.min_len = 1 
dialplan.area_code.max_len = 15
dialplan.area_code.line_id = 
dialplan.block_out.number.1 =
dialplan.block_out.line_id.1 =
dialplan.replace.prefix.1 = 
dialplan.replace.replace.1 = 
dialplan.replace.line_id.1 =
features.normal_refuse_code = 486
account.X.dnd.on_code = 
account.X.dnd.off_code =
call_waiting.enable = 1
call_waiting.tone = 
features.save_call_history = 
features.relog_offtime = 5
phone_setting.is_deal180 = 1
firmware.url = http://SERVER.niacs.nl/provisioning/yealink/firmware/25.73.0.40.rom
over_the_air.url =  
over_the_air.base_trigger = 
over_the_air.handset_tip =   
trusted_certificates.url =
trusted_certificates.delete = 
server_certificates.url = 
server_certificates.delete = 
auto_dst.url =
dialplan_replace_rule.url =
blacklist.url =
handset.X.contact_list.url = 
custom_factory_configuration.url =
openvpn.url = 
remote_phonebook.data.X.url = 
remote_phonebook.data.X.name = 
directory.update_time_interval = 1440
xsi.host = 
xsi.user = 
xsi.password = 
bw_phonebook.group_enable = 1
bw_phonebook.group_common_enable = 0
bw_phonebook.enterprise_enable = 0
bw_phonebook.enterprise_common_enable = 0 
bw_phonebook.personal_enable = 0
bw_phonebook.update_interval = 1440
bw_phonebook.call_log_enable = 0
voice.tone.country = Custom 
voice.tone.dial = 
voice.tone.ring = 
voice.tone.busy = 
voice.tone.callwaiting =  
handset.1.incoming_lines = 
handset.1.dial_out_lines = 
handset.1.dial_out_default_line = 
handset.1.name =
autoprovision.1.name =        
autoprovision.1.code =        
autoprovision.1.url =         
autoprovision.1.user =        
autoprovision.1.password =    
autoprovision.1.com_aes =     
autoprovision.1.mac_aes =     
managementserver.enable = 
managementserver.username = 
managementserver.password = 
managementserver.url = 
managementserver.periodic_inform_enable = 
managementserver.periodic_inform_interval = 
managementserver.connection_request_username = 
managementserver.connection_request_password = 
custom.handset.time_format = 
custom.handset.date_format =